| STANDARD FEATURES |
| Capacity |
2 through 10 cubic yd. containers |
| Self-leveling Forks |
1 1/4" x 4" Bar, 4150 steel |
| Cylinders, Fork Tilt |
Two 4" Bore x 29" stroke |
| Cylinders, Lift |
Two 4" Bore x 32" stroke |
| Cylinder Pivot Points |
Bronze bearings |
| Fenders |
12 GA. steel |
| Hydraulic Tank |
10 gallon capacity |
| Controls |
Inside & outside of cab |
| Lift & Rotator Capacity |
8,000 lbs. *(see FMVSS caution note) |
| Grease Fittings |
At all wear points |
| Pump |
11 gallons per minute |
| Valve |
20 G.P.M., 2 spool |
| Filter |
200 mesh, in-tank suction strainer / 25 micron, return filter |
| Operating Pressure |
1200 P.S.I. |
| Container Bumpers |
Molded rubber |
| Backup Alarm |
|
| Stacking Capability |
2-8 yd. |
| *K-PAC Model KPCC & KPCCR Carriers are designed to lift 8,000 lb. loads. However, truck chassis manufacturer's specific body and equipment weight and CG limitation must not be exceeded. KPCC installation will require calculation of CG for compliance with Federal Motor Vehicle Safety Standards (FMVSS). |